Is your Linksys RE6300 WiFi range extender troubling you? Are you experiencing connectivity issues or slow internet speed? Then you need to troubleshoot the error by performing Linksys RE6300 Reset. A factory reset will definitely help in resolving the problem and you can enhance your network once again. When you perform factory reset, the device settings set back to the default settings. This will erase all the configuration you have made to the device. Hence, the network related problem gets resolved. Don’t know exactly how to perform factory reset? No worries just check out our guide and grab the information you need. 

Why did Linksys RE6300 Reset?

Numerous reasons are there why you should perform Linksys RE6300 Reset and restore the default settings. These may includes:

Connectivity Issues

In case you are experiencing issues with the connectivity such as sudden dropouts, unable to connect, connected but no internet etc. then resetting the device may help you out. 

Forgot Login Credentials

The admin details cannot be reset without resetting the device back to the factory settings. So, if you forget the admin login or password information then you need to perform factory reset to get out of the problem.

Firmware Issue

Sometimes when we perform firmware updates, the extender may not work accurately. This cannot be cured until unless you perform factory reset. 

How to do Linksys RE6300 Reset?

You can easily perform factory reset by following the further given guide. You can opt any of the two methods to restore your device settings back to the factory default. 

By Using Device Reset Button

You can easily perform factory reset by using the reset button available on the RE6300 extender device. Check out the steps you should follow to restore the settings:

• Firstly you need to locate the reset button on the RE6300 extender device. 
• Press and hold the reset button on your RE6300 device for about 10 seconds 
• Thereafter release the button and monitor the device LED indicator. 
• During the process the device will reboot itself a couple of times. 
• Let the device completely erase the data 
• Once the reset is complete, when the device starts up again, you can re-configure the settings to add it back to your home network. 

By Using Web Interface

You can also perform Linksys RE6300 Reset by using the web interface. To move ahead with the web interface “http//extender.linksys.com” you need login details of your admin account. In case you forgot the details then move ahead with the reset button method. To follow the web interface process check the given steps:

• Firstly open the web browser you wish to use such as safari, google chrome, firefox etc. 
• In the address bar of the browser type “http//extender.linksys.com” or use default IP.
• Once the web page loads completely, click on access range extender settings option
• Go to the login section and use the admin information to access the page. 
• Afterwards, go to the settings and then the administration option. 
• Look for the factory reset option and move ahead with the on screen guide. 
• Complete the process and let the device set back to the factory settings. 
• Lastly you have to perform Linksys RE6300 setup to add back the device in your home network.

How To Set Up The Device Again?

You can configure your reset device by following the further mentioned steps. These steps are very helpful to get the device back on the network so you can enjoy uninterrupted services. 

• Firstly, take a laptop or computer and go to the web browser you wish to use such as safari, google chrome, firefox etc. 
• Thereafter in the address bar of the browser type “http//extender.linksys.com” or use default IP.
• Once the web page loads completely, click on setup range extender option
• Choose the model name, login with your linksys account and then start configuring. 
• Connect the device to your home network by adding the network information 
• Create your new network SSID & password to enhance security. 
• Complete the Linksys RE6300 setup and enjoy the network

Troubleshoot A Failed Reset

Sometimes, resetting the device back to the factory settings attempt fails. You can easily troubleshoot the problem by following the given steps:

Check the Power Source

Ensure that the Linksys RE6300 range extender is properly plugged in and receiving power. 

Hold the Reset Button Longer

If the reset doesn’t seem to work, try holding the reset button for a longer period, up to 30 seconds. This will resolve the problem and you can perform a reset of the device.

Use a Different Device for Web Interface

If you cannot access the web interface on one device, try another device, or clear your browser’s cache. This will resolve the issue and you can perform factory reset. 

Firmware Update

In some cases, updating the extender’s firmware before performing the reset can resolve persistent issues.

Hope the above mentioned information is helpful for you. You can check out with technicians if you face any issue yet with the Linksys RE6300 Reset. In addition you can also take help if you encounter any issue.